Assembly Description of Upright Pole

Step 1: Thread the wire of the Load Cell (9) on the rod seat (1) through the upright pole (2). Insert the upright pole into the rod seat and then lock it with two screws (5).

Step 2: After threading the Load Cell wire through the bracket (3), attach the bracket to the Upright pole and then lock it with the screw (6).

Note: if the load cell connector is too big to thread through the bracket, separate the bracket by removing the Knob pole (7), see the following pictures.

Step 3: Install the Indicator (4) on the bracket,with the bracket aligning with the bracket slot(8) of the indicator.

Step 4: After connecting load cell connector to load cell port, the installation of bench scale is completed.

Note: Use the knob pole (7) to adjust the inclination angle of indicator and the screw (6) to adjust direction of the indicator. After adjusting the indicator to an optimal position, lock the screw.