Three-color backlight waterproof bench scale function settings

(One) Capacity and Division settings

Press and hold TARE and M+keys to turn on the indicator 

Press M+ key to increase the value

Press the TARE key to shift to the right

Enter the number 8529

Press Zero to save

Press the TARE key to shift the decimal point to the right

Set capacity

Press M+ key to select 15kg, press ZERO and press SAVE

Press TARE key to set division of 1g

Press ZERO key to save

Turn off the indicator after CAL is shown

(TWO) Capacity settings

Press and hold TARE key to turn on the indicator

Press M+ key to increase the value

Press the TARE key to shift to the right

Enter the number 8529

Press TARE key to save it and CAL is shown

Press TARE key to enter calibration

The indicator shows 5kg

Place the same weight on the platform

Press TARE key

Indicator beeps and shows 5kg

Place a 10kg weight on the platform

Press TARE key

Indicator beeps and shows 10kg

Place a 15kg weight on the platform

Press TARE key

Indicator beeps and shows 15kg

Press SAVE key and PASS is shown

(Three) Check weighing settings

Press and hold SET key to turn on the indicator

Press TARE key until CK.HILO is shown to enter check weighing settings

Press SET key to set HI value

Press the TARE key to shift to the right

Press M+ key to increase the value

Set HI value to be 4kg

Press ZERO key and save it

Press TARE key to chose LO

Press SET key to set LO value

Press the TARE key to shift to the right

Press M+ key to increase the value

Set LO value to be 3kg

Press ZERO key to save it

Press ZERO key to exit the settings

Place calibrated weight on the platform

When the weight is too low, the screen shows yellow

Add calibrated weight and the weight shows 3kg

The screen shows green

Add calibrated weights until overweight

The screen shows red and alarms

Optional external devices are also available