U-key function of the table scale JWL

Steps:

1. Long press the SET key while powering on

2. Press MR (memory recall) key to find until Peri is displayed

3. Press SET key

4. Press MR (memory recall) key to find the U-key and save it.

5. After checking the baud rate, save the settings

6. Save it after setting stable sending

7. Set the format and save the format after selecting 01

8. Exit Settings

9. Use the U-key cable to connect the desk scale to the computer

10. The computer recognizes the USB

11. Create a new Excel document and open it

12. Weighing with weights on a table scale

13. After the weighing is stabilized, the weighing data is sent to the computer at the same time

14. Set format 02, save and exit

15. Weighing with weights on a table scale

16. Send weighing data to PC after stabilization andformat 2 is displayed

17. Set format 03, save and exit

18. Send weighing data to PC after stabilization andformat3 is displayed

19. Set format 04, save and exit

20. Send weighing data to PC after stabilization andformat4 is displayed

21. Set sending manually, save and exit

22. After the weighing is stable, press PRINT to send the weighing data to the computer

Specification：